Showing 651 to 660 out of 660 results.

To view archived publications, view the Publication Archive page.

This is a regulatory impact statement for proposed changes to minimum energy performance standards (MEPS) for motors falling within the scope of the joint Australian New Zealand Standard AS/NZS 1359.5. These are three-phase induction motors with output ratings from 0.73 kW up to but not including 185 kWh. They are used in a wide range of applications, including air-conditioning and ventilation systems, pumps, mechanical drives and compressors. The new regulation would take effect from 2006.

This regulatory impact statement (2003/08) was prepared by Syneca Consulting and released on the 25th of August, 2003.

It proposed changes to minimum energy performance standards (MEPS) for air-conditioners falling within the scope of the joint Australian New Zealand Standard AS/NZS 3823.

These are air-conditioners of the refrigerative type with a cooling capacity of up to 65kW. They may be configured for cooling only or with a reverse cycle capability to provide both cooling and heating services.

This MEPS Profile (Report Number 2002/10) has been released outlining the proposed strategies that the Australian Government will introduce with respect to regulating Lamps.

Fact Sheet 1: MEPS for fluorescent lamp ballasts – provides an outline of the regulatory requirements for fluorescent lamp ballasts used with linear fluorescent lamps in Australia.

This report has been commissioned by the Australian Greenhouse Office as part of the National Appliance and Equipment Energy Efficiency Program (NAEEEP). Its purpose is to explore the potential for energy and greenhouse savings through the introduction in Australia of Minimum Energy Performance Standards (MEPS) for electric lamps.This report describes the major types of electric lamp currently used in Australia and their characteristics.

 This regulatory impact statement to investigate revised MEPS for three phase electric motors was commissioned by NAEEEC and was prepared by Syneca Consulting. This public comment draft was released in December 2003.This regulatory impact statement analyses proposed changes to minimum energy performance standards (MEPS) for motors falling within the scope of the joint Australian New Zealand Standard AS/NZS 1359.5. These are three-phase induction motors with output ratings from 0.73 kW up to but not including 185 kWh.

The purpose of this study (June 2000) is to review the effectiveness and further potential of the Australian Gas Association (AGA) energy labelling program for gas water heaters.